To Next Page

To Previous Page

723–0018 /02 F70 91

Code E1000201: “LaserDriver A heatsink 1 temperature exceeded” (Error)

Situation Solution

This error appears alone:

Insufficient air flow through

laser driver housing.

check for clogged vents OR the laser bank connected to the affected driver

output may be partly or entirely short-circuited.

Error appears alongside other

Cooler related errors.

Resolve cooler related errors first.

Code E1000300: “LaserDriver A bank 1 temperature reading failure” (Error)

Situation Solution

Not possible to reliably read

out the temperature of a

specific laser bank.

Check wiring for that bank, from driver to light source. (Returned NTC

temperature value is impossible).

Code E1000400: “LaserDriver A heatsink 1 temperature reading failure” (Error)

Situation Solution

Not possible to reliably read

out the temperature of a

specific laser driver heatsink.

Returned NTC temperature value is impossible. Check wiring to the laser

driver module.

Code E1100101: “LaserDriver A bank 2 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000101: “LaserDriver A bank 1

temperature exceeded”.

Code E1100201: “LaserDriver A heatsink 2 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000201: “LaserDriver A heatsink

1 temperature exceeded”.

Code E1100300: “LaserDriver A bank 2 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000300: “LaserDriver A bank 1

temperature reading failure”.

Code E1100400: “LaserDriver A heatsink 2 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000400: “LaserDriver A heatsink

1 temperature reading failure”.

Code E1200101: “LaserDriver A bank 3 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000101: “LaserDriver A bank 1

temperature exceeded”.

Code E1200201: “LaserDriver A heatsink 3 temperature exceeded” (Error)

For this error the same troubleshooting table can be applied to as for code E1000201: “LaserDriver A heatsink

1 temperature exceeded”.

Code E1200300: “LaserDriver A bank 3 temperature reading failure” (Error)

For this error the same troubleshooting table can be applied to as for code E1000300: “LaserDriver A bank 1

temperature reading failure”.

Troubleshooting

Brand	Barco
Model	F70
Category	Projector
Language	English

Barco F70 User Manual

Table of Contents

Questions and Answers:

Barco F70 Specifications

Related product manuals