Barco Prometheus I Safety & Instruction Manual

10. Removal and installation of the projector covers
10.5 Removal of the side cover
Necessary tools
Flat screwdriver
How to remove
1. Release both ca ptive screws on top of the side cover.
Image 10-10
Captive screws
2. Push both lock to each other to release the locks and pull at the same time the bottom side of the cover away form the projector.
Image 10-11
Unlock side cover
3. Take off the c over.
R5905963 PROMETHEUS SERIES 09/03/2015
139

Barco Prometheus I Specifications

General

Brand	Barco
Model	Prometheus I
Category	Projector
Language	English