30
General
Cleaning MC5-IS
If MC5-IS needs cleaning, use cloth soaked with a mild solution of
tall oil soap (pine soap). Wait a few minutes and then rinse using a
cloth moistened with pure water. Never use any strong detergents.
Cleaning the Contacts of the Internal Reference Junction Module
The contacts of the Internal Reference Junction Block may need
cleaning from time to time. The time period varies depending on
the environment MC5-IS is used in.
Carefully open the cover of the Internal Reference Junction Block
by using a screwdriver as a wrench. Now you can see the contacts.
Remove all impurities and press back the cover. The cover is se-
cured when you hear a click.
To Next Page
Loading...
