33
Basic Mode, Defined
Every time MC5-IS is switched on, the startup procedure ends in
Basic Mode.
All non-calibration related measurements and generations are per-
formed in the Basic Mode. Briefly: in Basic Mode MC5-IS works like
a high quality multimeter. When returning from MC5-IS’ higher level
operations (calibration, viewing of calibration results, calibrator and
user configurations), you always return to the Basic Mode.
W h e r e
s h o u l d I g o
t o d a y . . .
B a s i c M o d e :
M e a s u r e m e n t
G e n e r a t i o n . . .
In Basic Mode, the two available measurement/ generation/
simulation windows have default settings based either on factory
settings or settings defined when MC5-IS was previously used.
The first time the D/Menu key is pressed, the
WW
WW
W
indoindo
indoindo
indo
w 1 Setupw 1 Setup
w 1 Setupw 1 Setup
w 1 Setup
menu is available. Other possible menus can be selected from the
function keys: B/Window 2 Setup and C/Others. The latter function
key opens a menu with some special functions and also includes
the possibility to go to higher level operations.
Starting MC5-IS
To Next Page
Loading...
