CONTROLS AND
DEVICES
5
Disassembly of hydraulic clutch pump
Empty the clutch pump circuit:
Unscrew the special screw (16), keeping the gaskets (17) to disconnect the clutch control hose
from the master cylinder group.
Unscrew the fixing screws (2) of the mounting clamp and remove the clutch pump (3) from the
handlebar.
For disassembly and replacement of clutch pump components follow the instructions of the
exploded draw.
After having reassembled the clutch control fill the clutch circuit using the proper oil.
Sub 5-10
To Next Page
Loading...
