USE
MAINTENANCE
3
Front brake fluid replacement
Remove the cover (1) with membrane from the brake fluid reservoir unscrewing the screws (2).
To suck the fluid out from the reservoir.
Enter the new oil inside the reservoir up to the mark MAX.
Operate the lever two or three times so as to allow the circuit to go under pressure.
Keep pulled the lever to the grip.
Connect a transparent hose to the draining valve (3) then dip the other end in a container placed in
the floor .
Unscrew the draining valve (3) to allow the oil to come out.
Sub 3-19
To Next Page
Loading...
