bimota DB7 - Products Specifications

GENERAL
INFORMATIONS
1
1.2 - PRODUCTS SPECIFICATIONS
The table shows the characteristics relating to the various products used for lock, lubrication and
seal.
Recommended
product
Specifications
Loctite 222
Low strength threadlocker.
Loctite 243
Medium strength threadlocker, tolerates slight oily contaminations.
Loctite 270
Stud lock high strength threadlocker.
Loctite 510
Flange sealant for sealing rigid metal joints. High strength, solvent proof, 200°C
resistant, 350 BAR, fill 0,4mm clearance.
Loctite 128455
Permanent structural adhesive for cylinder coupling or threads. High strength,
solvent resistant. -55°C ÷ +175°C.
Loctite 577
Medium strength pipe sealant for metal threads, for water and every gas (except
for oxygen). 0,4mm clearance filler.
Loctite 480
Rubber-toughened instant adhesive, for bonding metal to metal and metal to
rubber.
Loctite 601
High strength low viscosity retaining compound (for thread, bush, grooved, key).
-55°C ÷ +150°C.
Loctite 401
Medium strength threadlocker.
Loctite 128443
Product suitable to lock metallic cylinder coupling or threads. High strength, high
temperature proof, solvent proof.
Loctite 128443
Instantaneous jelly adhesive, traction and cut resistant.
942470014
DUCATI liquid gasket.
Sub 1-4