bimota DB7 - Punching of the Frame (European Version); Punching of the Frame (United States Version); General Informations

GENERAL
INFORMATIONS
1
1.1 - IDENTIFICATION OF THE MOTORCYCLE
The Bimota DB7 is marked by two identification numbers, respectively for the frame and for the
engine and by a plate with the data of the model.
The numbers which identify the model must be mentioned when asking for spare parts.
Punching of the frame (European version)
1. Manufacturer
2. Model
3. Variant/version
4. Model year
5. Production site
6. Identification number ZES DB07 00 8 R 000000
Punching of the frame (USA version)
1. Manufacturer
2. Model
3. Check digit
4. Model year
5. Production site
6. Identification number ZES D711S * 9 R 000001
The vehicle identification number is stamped on the right side of the steering head tube.
Sub 1-2
1
2
3 4
5
6
1
2
3 4
5
6