TECHNICAL
SPECIFICATIONS
2
2.3 - LUBRICANTS AND REFUELING
Refueling Type Quantity
Fuel tank, reserve included Lead-free fuel ,with octane number
to the origin of at least 95
18,0 dm³ (litres) – reserve included
Lubricant circuit Lubricant circuit 3,7 dm³ (litres)
Brakes (front-rear) and clutch
circuit
Brake DOT 4
Front fork EBH 16 oil 380cc
Cooling system Coolant 40÷50% + water 2,2 dm³ (litres)
IMPORTANT
It's not permitted the use of additives in the fuel or in the lubricants.
Motor oil
A good oil has some specific features. Use only extremely detergent oil, certify on the bottle to
be equivalent, or higher, to the service necessity SE, SF or SG.
Viscosity: SAE 10W-40
If the motorcycle is used in an area where the temperatures are to the limit of range, select the
right oil viscosity using the chart.
Sub 2-11
To Next Page
Loading...
