USE
MAINTENANCE
3
CAUTION
During the filling operation keep the oil level above the MIN mark to prevent the formation of air
bubbles inside the circuit.
Drain the oil from the draining valve (3) until the leakage of liquid of different colour.
Screw the draining valve (3) and restore the proper level of oil tank .
NOTES
Repeat the process on both caliper.
Put the cover (1) carrying out operations in reverse order of disassembly operations.
Rear brake fluid replacement
Unscrew the cover (4) of the rear brake fluid reservoir.
To suck the fluid into the reservoir.
Enter the new oil inside the reservoir up to the mark MAX.
Sub 3-20
To Next Page
Loading...
