ELECTRICAL SYSTEM
10
Rear stop light replacement
USA version
To replace the rear stop light bulb, unscrew the screws (1) and take the red lens (2) out from the
light support.
Remove the light bulb (3) from the support.
Replace the bulb (3) and re-insert it in the bulb support.
Reassemble the red lens (2) on the light support.
Re-screw the screws (1).
Europe version
In the European version in case of malfunctioning it is necessary to replace the whole tail light, as it
use LED instead of bulbs.
Sub 10-31
To Next Page
Loading...
