USE
MAINTENANCE
3
Push on the small internal piston to make leak all the fluid content inside the cap.
Proceed the reassembly of the piston assembly tightening the screws (3) to the prescribed torque.
Tighten the bleeding valve to the prescribed torque.
Clutch liquid filling
CAUTION
The fluid used in the clutch system, apart damaging the paint, is very damaging in contact of eyes
and skin; wash thoroughly with running water, the interested parts in the event of accidental
contact.
Fill the reservoir with prescribed oil from an intact container.
IMPORTANT
Keep always the oil of the circuit at level during the whole operation and leave the end of the
transparent hose always dipped in the drained liquid.
Sub 3-30
To Next Page
Loading...
