FRAME
7
Handlebar removal
To remove the R.H. handlebar it is necessary to remove the following particulars:
- throttle grip
- R.H. switch
- front brake control
To remove the left handlebar, is necessary to remove the following particulars:
- L.H. switch
- handle grip
- clutch hydraulic control
To remove the steering head (upper steering clamp):
Loosen the clamp screws (4) from each half-handlebar support.
Open the supports (6) and (7) paying attention to do not lose the shims (5) then remove each
support.
Unscrew the screw (2) then extract the half-handlebar (1) from its support (6).
Repeat the operation for the other half-handlebar.
Sub 7-3
To Next Page
Loading...
