USE
MAINTENANCE
3
Connect to draining valve (3) or (5) of the caliper a bleeding device, commonly available in trade.
Loosen the draining valve (3) or (5) and pump with the bleeding device until no more fluid exit from
the circuit.
NOTES
When using a brake bleeding device, follow the manufacturer’s instructions.
In case of a draining device is not available, connect a transparent plastic hose to the draining
valve 3 or 5 of the caliper, then dip the other end into a container on the floor, with used brake fluid
inside.
Unscrew of ¼ of turn the draining valve.
Move the lever or the brake pedal till the total leakage of the liquid.
Perform the operation for each brake caliper.
Sub 3-23
To Next Page
Loading...
