SmartFlex
4.16.6 SMS
The SMS Configuration page is not available for the SmartFlex SR300 routers (LAN
version).
Open the SMS Configuration page, clic k SMS in the Configuration section of the main
menu. The router can automatically send SMS messages to a cell phone or SMS message
server when certain events occur. The form allows you to select which events generate an
SMS message.
Item Description
Send SMS on power up Activates/deactivates the sending of an SMS mes-
sage automatically on power up.
Send SMS on connect to mobile
network
Activates/deactivates the sending of an SMS mes-
sage automatically when the router is connected to
a mobile network.
Send SMS on disconnect to mo-
bile network
Activates/deactivates the sending of an SMS mes-
sage automatically when the router is disconnection
from a mobile network.
Send SMS when datalimit
exceeded
Activates/deactivates the sending of an SMS mes-
sage automatically when the data limit exceeded.
Send SMS when binary input on
I/O port (BIN0) is active
Automatic sending SMS message after binary input
on I/O port (BIN0) is active. Text of message is in-
tended parameter BIN0.
Add timestamp to SMS Activates/deactivates the adding a time stamp to the
SMS messages. This time stamp has a fixed format
YYYY-MM-DD hh:mm:ss.
Phone Number 1 Specifies the phone number to which the router sends
the generated SMS.
Phone Number 2 Specifies the phone number to which the router sends
the generated SMS.
Phone Number 3 Specifies the phone number to which the router sends
the generated SMS.
Unit ID The name of the router. The router sends the name
in the SMS.
BIN0 – SMS SMS text messages when activate the first binary in-
put on the router.
Table 58: SMS Configuration
103
To Next Page
Loading...
Need help?
General