B+B SmartWorx SmartFlex User Manual

SmartFlex
6.3 Change Password
Use the Change Password configuration form in the Administration section of the main
menu for changing your password used to log on the device. Enter the new password in the
New Password field, confirm the password using the Confirm Password field, and press the
Apply button.
The default password of the router is root for the root user. To maintain the security of
your network change the default password. You can not enable remote access to the
router for example, in NAT, until you change the password.
Figure 75: Change Password
6.4 Set Real Time Clock
You can set the internal clock directly using the Set Real Time Clock dialog in the Ad-
ministration section of in the main menu. You can set the Date and Time manually. When
entering the values manually use the format yyyy-mm-dd as seen in the figure below. You can
also adjust the clock using the specified NTP server. IPv4, IPv6 address or domain name is
supported. After you enter the appropriate values, click the Apply button.
Figure 76: Set Real Time Clock
129

B+B SmartWorx SmartFlex Specifications

General

Brand	B+B SmartWorx
Model	SmartFlex
Category	Network Router
Language	English