SmartFlex
Continued from previous page
Item Description
MRU Specifies the Maximum Receiving Unit. The MRU identifies the max-
imum packet size, that the router can receive via PPPoE. The default
value is 1492 B (bytes). Other settings can cause incorrect data trans-
mission. Minimal value in IPv4 and IPv4/IPv6 mode is 128 B. Minimal
value in IPv6 mode is 1280 B.
MTU Specifies the Maximum Transmission Unit. The MTU identifies the
maximum packet size, that the router can transfer in a given environ-
ment. The default value is 1492 B (bytes). Other settings can cause
incorrect data transmission. Minimal value in IPv4 and IPv4/IPv6
mode is 128 B. Minimal value in IPv6 mode is 1280 B.
Get DNS
addresses from
server
It is enabled to obtain the DNS addresses from the server by default.
Table 28: PPPoE configuration
Setting a bad packet size value (MRU, MTU) can cause unsuccessful transmission.
50
To Next Page
Loading...