SmartFlex
3. Status
3.1 General Status
Selecting the General item will open a screen displaying a summary of basic information
about the router and its activities. This page is also displayed when you login to the web
interface. Information is divided into several sections, based upon the type of router activity or
the properties area: Mobile Connection, Primary LAN, Secondary LAN, Peripheral Ports and
System Information. If the router is in the Ethernet switch or RS232-RS485-ETH version, there
will be a Tertiary LAN section. If the router is WiFi equipped, there will be a WiFi section.
IPv6 Address item can show multiple different addresses for one network interface. This is
standard behavior since an IPv6 interface uses more addresses. The second IPv6 Address
showed after pressing More Information is automatically generated EUI-64 format link local
IPv6 address derived from MAC address of the interface. It is generated and assigned the first
time the interface is used (e.g. cable is connected, Mobile WAN connecting, etc.).
3.1.1 Mobile Connection
Item Description
SIM Card Identification of the SIM card (Primary or Secondary).
Interface Defines the network interface.
Flags Displays network interface flags.
IP Address IPv4 address of the network interface.
IPv6 Address IPv6 address or addresses of the network interface – there can
be more IPv6 addresses assigned to one network interface.
MTU Maximum packet size that the equipment is able to transmit.
Rx Data Total number of received bytes
Rx Packets Received packets
Rx Errors Erroneous received packets
Rx Dropped Dropped received packets
Rx Overruns Lost received packets because of overload.
Tx Data Total number of sent bytes
Tx Packets Sent packets
Tx Errors Erroneous sent packets
Tx Dropped Dropped sent packets
Continued on next page
7
To Next Page
Loading...