B+B SmartWorx SmartFlex User Manual

SmartFlex
Item Description
Enable IPv6 prefix delegation
Enables prefix delegation configuration filled-in below.
Subnet ID The decimal value of the Subnet ID of the Ethernet inter-
face. Maximum value depends on the Subnet ID Width.
Subnet ID Width The maximum Subnet ID Width depends on your Site
Prefix – it is the remainder to 64 bits.
Table 19: IPv6 prefix delegation configuration
Authentication (802.1x) to Radius server can be enabled in next configuration section. This
functionality requires additional setting of identity and certificates as described in following
table.
Item Description
Enable IEEE
802.1X Authenti-
cation
Select this option to enable 802.1X Authentication.
Authentication
Method
Select authentication method (EAP-PEAPMSCHAPv2 or EAP-TLS).
CA Certificate Definition of CA certificate for EAP-TLS authentication protocol.
Local Certificate Definition of local certificate for EAP-TLS authentication protocol.
Local Private Key Definition of local private key for EAP-TLS authentication protocol.
Identity User name – identity.
Password Access password. This item is available for EAP-PEAPMSCHAPv2
protocol only.
Local Private Key
Password
Definition of password for private key of EAP-TLS protocol. This item
is available for EAP-TLS protocol only.
Table 20: Configuration of 802.1X Authentication
29

B+B SmartWorx SmartFlex Specifications

General

Brand	B+B SmartWorx
Model	SmartFlex
Category	Network Router
Language	English