SmartFlex
6.5 Set SMS Service Center Address
The SmartFlex SR300 router does not support the Set SMS Service Center Address
option.
The function requires you to enter the phone number of the SMS service center to send
SMS messages. To specify the SMS service center phone number use the Set SMS Ser-
vice Center configuration form in the Administration section of the main menu. You can leave
the field blank if your SIM card contains the phone number of the SMS service center by
default. This phone number can have a value without an international prefix (xxx-xxx-xxx)
or with an international prefix (+420-xxx-xxx-xxx). If you are unable to send or receive SMS
messages, contact your carrier to find out if this parameter is required.
Figure 77: Set SMS Service Center Address
6.6 Unlock SIM Card
The SmartFlex SR300 router does not support the Unlock SIM Card option.
If your SIM card is protected using a 4 - 8 digit PIN number (Personal Identification Num-
ber), open the Unlock SIM Card form in the Administration section of the main menu and enter
the PIN number in the SIM PIN field, then click the Apply button. The router requires you to
enter the PIN code each time that you power up the SIM card.
The SIM card is blocked after three failed attempts to enter the PIN code. Unblocking of
SIM card by PUK number is described in next chapter.
Figure 78: Unlock SIM Card
130
To Next Page
Loading...
Need help?
General