Page 356 of 479
Active Color Section: Defines the active color for the process value band. For example: If a
process value range is 0-100, set different bands in % for the process
value, and define colors to appear within the level Bar graph during Run
Time.
When the process value is between 0 and 50 % of scale, display bricks in Lime color.
When the process value is between 51 and 80 % of scale, display bricks in Yellow color
When the process value is between 81 and 100 % of scale, display bricks in Red color.
Configuration from Property grid
Click the “ColorSection Array and the following screen will appear. Then, set all the bands and
colors.
Inactive Color Section: Define Inactive colors for process value bands the same as above.
Generally, light colors are selected for Inactive colors and dark colors
with more contrast are selected for Active colors. This way,
users/operators will be able to differentiate between active and inactive
colors easily.
To Next Page
Loading...
Need help?
General
