Canmax CM-2D601 - Tx Postamble

Enter 125 End
*/$%ENTR* *ZEND*
6. Memory / Bluetooth / Cable General Setting
6-3-20 Tx Postamble
Postamble Code refers to a sequence of characters which appends to both
barcode data and Suffix Code during data transmission. Scan the appropriate
barcode to enable or disable Postamble Code.
*0SH0*
Disable
*0SH1*
Enable
6-3-21 Postamble data
Setting Postamble code content
*4TK+*
Configuration Length
Default Setting
8 <CR><LF>(0x0D0x0A)
Procedure
(A) Scan “Enter” barcode
(B) Scan “Postamble data” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
6-3-21 Postamble data
6-3-20 Tx Postamble