Enter 260 End
*/$%ENTR* *ZEND*
8. Symbology Settings
8-11-5 Insertion1DataPosition
To set up the positon to insert data1
*FZ6+*
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Insertion1DataPosition” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
8-11-6 Insertion1Data
To set up data1 to be inserted
*HZ8+*
Configuration Range Default Setting
0~48 0
Configuration Length
Default Setting
2 NULL
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Insertion1Data” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
8-11-5 Insertion1DataPosition
8-11-6 Insertion1Data
To Next Page
Loading...
