Canmax CM-2D601 - Bluetooth Mode; Function Switch (Memory Mode to Bluetooth Mode)

37
4. Memory / Bluetooth Mode
4-2 Bluetooth Mode
User can configure different Bluetooth connection mode in different
Bluetooth environment.
1. Slave Mode (For third party Bluetooth devices)
2. Master Mode (For third party Bluetooth devices)
3. HID Mode (Third party Bluetooth devices with USB HID mode)
4. iOS Mode (iPad, iPhone)
5. A-303 Dongle Mode ( Original factory dongle, USB-HID / USB-COM
configurable)
6. A-302 Dongle Mode (Original factory dongle , USB-HID only)
4-2-1 Function switch (Memory Mode to Bluetooth mode)
There are two methods of switching from Memory mode to Bluetooth Mode:
1.Long keep holding Scan key, till the LED as solid color, then release Scan
key, it will into the mode switching,if the LED turn to blue color, it is in BT
mode.
OR
2.Scan the following barcode to Bluetooth Mode.
(1) Enter: (Enter setting) */$%ENTR*
(2) To Bluetooth mode *ZTOB*
4-2 Bluetooth Mode
4-2-1 Function switch (Memory Mode to Bluetooth mode)