Canmax CM-2D601 - Remote Mac Address

44
4. Memory / Bluetooth Mode
4-2-5-2 Remote Mac Address.
1. Master Mode
Mac address configuration, total of 12 digits, Please refer to the HEX ASCII
table (From 0~9, A~F).
Configuration Max. Configurable Length Default Setting
Hexadecimal /
decimal
barcode table
12 digits 000000000000
Procedure:
(1) Enter: (Enter setting) */$%ENTR*
(2) “BtMacAddr” *A4W+*
(3) Scan Hexadecimal/Decimal Barcode table for input parameters.
(4) OK : (Selection confirmed) *%OK*
(5) End: (Exit setting) *ZEND*
Example:
Set Remote Mac Address to 00126F006EAA
A. Scan “Enter” barcode
B. Scan “BtMacAddr” barcode
C. Scan parameters from Hexadecimal /decimal barcode table =>“0”, “0”,
“1”,”2”, “6”,”F”, “0”,”0”, “6”,”E”, “A”,”A” ”OK” (Set “Remote Mac Address
“ value to 00126F006EAA)
D. Scan “End” barcode
Note:
If scanner connection mode is ”Slave” or “HID” or “iOS” Mode, Mac Address
configuration does not required.