Enter 189 End
*/$%ENTR* *ZEND*
7. General Configuration Setting
7-3-25 All Memory Data Transmission
When scan this barcode, it is able to output the data in the memory.
*ZMTX*
Procedure:
(A) Scan “Enter” Barcode
(B) Scan “All Memory Data Transmission” Barcode
7-3-26 Footer Characters
When output the barcode data from memory, the Footer is able to change to
what the string you need, max is 16 characters.
*F3K+*
Configuration Length
16 <Footer>
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Footer Characters” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
7-3-25 All Memory Data Transmission
7-3-26 Footer Characters
To Next Page
Loading...
