Canmax CM-2D601 - Insertion2 Dataposition

Enter 310 End
*/$%ENTR* *ZEND*
8. Symbology Settings
8-19-11 Insertion2DataPosition
To set up the position to insert data2
*M20+*
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Insertion2DataPosition” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
8-19-12 Insertion2Data
To set up the data2 to be inserted
*O22+*
Configuration Range Default Setting
0~80 0
Configuration Length
Default Setting
2 NULL
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Insertion2Data” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
8-19-11 Insertion2DataPosition
8-19-12 Insertion2Data