Canmax CM-2D601 - Composite Triggers Functionality; Small Trigger Functionality

Enter 75 End
*/$%ENTR* *ZEND*
6. Memory / Bluetooth / Cable General Setting
6-1-4 Composite Triggers Functionality ctionality
Some supplementary functions are necessarily executed by using composite
triggers though Scan Button primarily serves to scan barcodes, and Small
Trigger to initiate data transmission. In Memory mode, all the scanned barcode
data will be deleted by pressing small trigger and Scan button in a specified
sequence described below: while holding the small key till the orange LED light
starts flashing rapidly, press down Scan key at the same time and then release
both buttons. Scan the appropriate label to DelAll or disable functionality of file
deletion.
*1LG0*
Disable
*1LG1*
DelAll
6-1-5 Small Trigger Functionality
Small Trigger is designed to perform various supplementary operations, from
deleting single scanned , data charge to switching to data transmission mode,
according to the length of time the button has been pressed. To facilitate the
associated operations with Small Trigger, this parameter is available to specify
the degree of Small Trigger’s functionality. On the other hand, when Mem Tx is
enabled, the device able to switch to data transmission mode. By default,
Small Trigger is set for maximum functionality without limit.
*2LH1*
Del
*2LH2*
MemTx
*2LH3*
Normal
6-1-4 Composite Triggers Functionality
6-1-5 Small Trigger Functionality