Enter 332 End
*/$%ENTR* *ZEND*
8. Symbology Settings
8-23-7 Insertion1DataPosition
To set up the position to insert data1
*J4M+*
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Insertion1DataPosition” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
8-23-8 Insertion1Data
To set up data1 to be inserted
*L4O+*
Configuration Range Default Setting
0~80 0
Configuration Length
Default Setting
2 NULL
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Insertion1Data” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
8-23-7 Insertion1DataPosition
8-23-8 Insertion1Data
To Next Page
Loading...
