Canmax CM-2D601 - Truncatezero

Enter 248 End
*/$%ENTR* *ZEND*
8. Symbology Settings
8-9-7 TruncateZero
Whether to omit 0 from the beginning of the barcode
CodablocA
CodablocF
*9ZI0*
Disable
*M4Y0*
Disable
*9ZI1*
Enable
*M4Y1*
Enable
8-9-8 Insertion1DataPosition
To set up the position to insert data1
*BZK+*
CodablocA
*P50+*
CodablocF
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Insertion1DataPosition” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
Type Configuration Range
Default Setting
CodablocA 1~600 0
CodablocF 1~2048 0
8-9-7 TruncateZero
8-9-8 Insertion1DataPosition