Canmax CM-2D601 - Memory-SPP Type

Enter 173 End
*/$%ENTR* *ZEND*
7. General Configuration Setting
7-2-6 Memory-SPP Type
7-2-6-1 Communication Protocol
Whether to enable ” Ack/Nak” responese function
*0BP0*
None
*0BP1*
“Ack”/”Nak”
7-2-6-2 <STX> & <ETX> Characters
Scan below barcodes to set if need to add STX data(before the output barcode
data) & ETX data(after the output barcode data)
*1BQ0*
None
*1BQ1*
STX/ETX
7-2-6 Memory-SPP Type