Enter 261 End
*/$%ENTR* *ZEND*
8. Symbology Settings
8-11-7 Insertion2DataPosition
To set up the position to insert data2
*AZA+*
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Insertion2DataPosition” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
8-11-8 Insertion2Data
To set up data2 to be inserted
*CZC+*
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Insertion2Data” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
Configuration Range Default Setting
0~48 0
Configuration Length
To Next Page
Loading...
