38
4. Memory / Bluetooth Mode
4-2-2 LED indication under Bluetooth Mode
Description
Red
Indicates the charge status. When the battery is running low,
red LED light will be on to show a poor charge level. Once the
charging process is completed, red LED will flash slowly to
show a full battery charge.
Green
Good Read Indicator indicates whether the barcode is
successfully decoded. Green LED shows a successful
decoding attempt.
Blue
Under Bluetooth mode, and Bluetooth connection is not yet
connected, the blue LED indicator will be flash per 3 seconds.
Under Bluetooth Mode and if Bluetooth connection is not
connected, press and hold pairing key(small trigger) till the
blue LED light starts flashing rapidly, press down Scan Button
at the same time and then release both buttons for Bluetooth
pairing with your device.
When power on and if Bluetooth is connected, the blue LED
will be on.
4-2-2 LED indication under Bluetooth Mode
To Next Page
Loading...
