Enter 239 End
*/$%ENTR* *ZEND*
8. Symbology Settings
8-8-3 Gs1Emulation
The scanner can automatically format the output from GS1 data carrier to emulate
what would be encoded in an equivalent GS1-128 or GS1 Databar cmbol.
Gs1-128: It GS1-128 Emulation is scanned, all retail codes(U.P.C., UPC-E, EAN8, EAN13)
are expanded out to 16 digits.
Gs1DataBar: If GS1 databar Emulation is scanned, all retail codes(U.P.C., UPC-E, EAN8,
EAN13) are expanded out to 16 digits.
Code Expansion Off: If GS1 Code Expansion Off is scanned, retail code expansion id
disable, and UPC-E expansion is controlled bt the UPC-E0 Expanded setting.
EAN8 to EAN13: If EAN8 to EAN13 Conversion is scanned, all EAN8 bar codes are
converted to EAN13 format.
*QX00*
Gs1-128
To Next Page
Loading...
