Canmax CM-2D601 - ISBN Conversion

Enter 211 End
*/$%ENTR* *ZEND*
8. Symbology Settings
8-4-7 ISBN Conversion
If the barcode meets ”ISBN” regulation, whether to convert the scanning result to
ISBN coding
*JVV0*
Disable
*JVV1*
Enable
8-4-8 Wait Addon Time
Wait for decoding additional code, need to use ” Wait Add-on”; If to get the additional
code in a specified decoding time, then indicate, otherwise do not indicate
*KVE+*
Procedure: Example:
(A) Scan “Enter” barcode
(B) Scan “Wait Addon Time” barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is 20 ms, the
parameter value is 20 ms / 1 ms = 20
Configuration Range Unit Default Setting
0~500 ms 1 ms 120 ms
8-4-7 ISBN Conversion
8-4-8 Wait Addon Time