Canmax CM-2D601 - Insertion1 Data

Enter 249 End
*/$%ENTR* *ZEND*
8. Symbology Settings
8-9-9 Insertion1Data
To set up data1 to be inserted
*DZM+*
CodablocA
*I52+*
CodablocF
8-9-10 Insertion2DataPosition
To set up the position to insert data2
*FZO+*
CodablocA
*K54+*
CodablocF
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Insertion2DataPosition” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
Type Configuration Length
Default Setting
CodablocA
2 NULL
CodablocF
2 NULL
Procedure:
(A) Scan “Enter” barcode
(B) Scan “Insertion1Data” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
Type Configuration Range
Default Setting
CodablocA 1~600 0
CodablocF 1~2048 0
8-9-9 Insertion1Data
8-9-10 Insertion2DataPosition