Enter 177 End
*/$%ENTR* *ZEND*
7. General Configuration Setting
7-2-6-9 Transmission Record Gap Time
This function can set Delay Time between 2 records.
*8CE+*
Procedure: Example:
(A) Scan “Enter” barcode
(B) Scan “Transmission Record Gap
Time” barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is 200 ms, the
parameter value is 200 ms / 10 ms =
20
Configuration Range Unit Default Setting
0~2550 ms 10 ms 0 ms
To Next Page
Loading...
