Canmax CM-2D601 - Postamble Data

Enter 85 End
*/$%ENTR* *ZEND*
6. Memory / Bluetooth / Cable General Setting
6-1-23 Postamble data
Setting Postamblecode content
*1X4+*
6-1-24 Tx Prefix
Prefix Code is a sequence of characters interposed between Preamble Code
and barcode data during data transmission. Scan the appropriate barcode to
enable or disable Prefix Code.
*7W20*
Disable
*7W21*
Enable
Configuration Length
Default Setting
8 <CR><LF>(0x0D0x0A)
Procedure
(A) Scan “Enter” barcode
(B) Scan “Postamble data” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
6-1-23 Postamble data
6-1-24 Tx Prefix