Enter 149 End
*/$%ENTR* *ZEND*
7. General Configuration Setting
7-2-1-3 Shift Release Caps Lock
Scan the following barcode can let the user to press ”Shift” to release the
status of Caps Lock.
*5770*
Disable
*5771*
Enable
7-2-1-4 Transmission Timeout
After sending the information, how long time did not respond will start timeout
*27V+*
Procedure: Example:
(A) Scan “Enter” barcode
(B) Scan “Transmission Timeout”
barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
If configuration is.2 sec, the
parameter value is 2 sec / 1 sec = 2
Configuration Range Unit Default Setting
2 ~ 255 secs 1 sec 3 secs
To Next Page
Loading...
