Enter 313 End
*/$%ENTR* *ZEND*
8. Symbology Settings
8-20-5 TruncateLeading
To set up the number of digits to be omitted from the beginning of the barcode
*AZS+*
Procedure:
(A) Scan “Enter” barcode
(B) Scan “TruncateLeading” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
8-20-6 TruncateEnding
To set up the number of digits to be omitted from the end of the barcode
*CZU+*
Procedure:
(A) Scan “Enter” barcode
(B) Scan “TruncateEnding” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
Configuration Range Default Setting
0~80 0
Configuration Range Default Setting
0~80 0
8-20-5 TruncateLeading
8-20-6 TruncateEnding
To Next Page
Loading...
