Canmax CM-2D601 - Truncateleading

Enter 301 End
*/$%ENTR* *ZEND*
8. Symbology Settings
8-18-9 TruncateLeading
To set up the number of digits to be omitted from the beginning of the barcode
*M0K+*
Code39
*GSE+*
Code32
Procedure:
(A) Scan “Enter” barcode
(B) Scan “TruncateLeading” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
8-18-10 TruncateEnding
To set up the number of digits to be omitted from the end of the barcode
*O0M+*
Code39
*9SG+*
Code32
Procedure:
(A) Scan “Enter” barcode
(B) Scan “TruncateEnding” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
Type Configuration Range
Default Setting
Code39 0~48 0
Code32 0~48 0
Type Configuration Range
Default Setting
Code39 0~48 0
Code32 0~48 0
8-18-9 TruncateLeading
8-18-10 TruncateEnding