Canmax CM-2D601 - CMD Escape Characters; DLE Escape Characters

Enter 185 End
*/$%ENTR* *ZEND*
7. General Configuration Setting
7-3-17 DLE Escape Characters
Set Escape digits
*44I+*
Configuration Length
Default Setting
1 0x10
Procedure:
(A) Scan “Enter” barcode
(B) Scan “DLE Escape Characters” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
7-3-18 CMD Escape Characters
Set CMD digits in Record Packed Format
*54J+*
Configuration Length
Default Setting
1 0x13
Procedure:
(A) Scan “Enter” barcode
(B) Scan “CMD Escape Characters” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
7-3-17 DLE Escape Characters
7-3-18 CMD Escape Characters