Canmax CM-2D601 - BAR Escape Characters; ETX Escape Characters

Enter 186 End
*/$%ENTR* *ZEND*
7. General Configuration Setting
7-3-19 BAR Escape Characters
Set Bar digits in Record Packed Format
*64K+*
Configuration Length
Default Setting
1 0x11
Procedure:
(A) Scan “Enter” barcode
(B) Scan “BAR Escape Characters” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
7-3-20 ETX Escape Characters
Set Etx digits
*84M+*
Configuration Length
Default Setting
1 0x03
Procedure:
(A) Scan “Enter” barcode
(B) Scan “ETX Escape Characters” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
7-3-19 BAR Escape Characters
7-3-20 ETX Escape Characters