Canmax CM-2D601 - Truncateleading

Enter 247 End
*/$%ENTR* *ZEND*
8. Symbology Settings
8-9-5 TruncateLeading
To set up the number of digits to be omitted from the beginning the barcode
*EZE+*
CodablocA
*I4U+*
CodablocF
Procedure:
(A) Scan “Enter” barcode
(B) Scan “TruncateLeading” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
8-9-6 TruncateEnding
To set up the number of digits to be omitted from the end of the barcode
*GZG+*
CodablocA
*K4W+*
CodablocF
Procedure:
(A) Scan “Enter” barcode
(B) Scan “TruncateEnding” barcode
(C) Scan parameters from Hexadecimal / Decimal table
(D) Scan “OK“ barcode
(E) Scan “End” barcode
Type Configuration Range
Default Setting
CodablocA 1~600 0
CodablocF 1~2048 0
Type Configuration Range
Default Setting
CodablocA 1~600 0
CodablocF 1~2048 0
8-9-5 TruncateLeading
8-9-6 TruncateEnding