Adjusting the feed amount
7. Press ▲ or ▼ to select Manual , and then press the OK button.
T est pattern A is printed for manual adjustment.
Note
• When printing on sheets, follow the instructions on the Display Screen and remove the sheet.
8. Examine test pattern A for adjustment. Determine the pattern in which banding is least noticeable.
Note
• If banding seems least noticeable in two patterns but you cannot decide which one is better , choose
an intermediate value.
For example, choose 1 1 if you cannot decide whether pattern 10 or 12 is better .
9. Press ▲ or ▼ to select the pattern number you have decided, and then press the OK button.
T est pattern B is printed for adjustment.
Note
• If you printed test pattern A on a sheet, follow the instructions on the Display Screen and use another
sheet of the same type of paper .
Additionally , after test pattern B is printed, follow the instructions on the Display Screen and remove
the sheet.
10. Examine test pattern B for adjustment. Determine the pattern in which banding is least noticeable.
1 1. Press ▲ or ▼ to select the pattern number you have decided, and then press the OK button.
The adjustment value is now registered, and adjustment is complete.
Adjustments for Better Print Quality 617
To Next Page
Loading...
