Adjusting the feed amount
Fine-T uning the Paper Feed Amount (Adj. Fine Feed)
If the contrast is uneven or banding in dif ferent colors appears at 50 mm (2.0 in) intervals in printed documents, try
executing Adj. Fine Feed during printing to ne-tune the feed amount.
Note
• Always execute Adj. Quality before Adj. Fine Feed .
Once you execute Adj. Quality , the Adj. Fine Feed value will revert to 0.
( → P .614)
( → P .616)
Perform adjustment as follows.
1. On the T ab Selection screen of the Control Panel , press ◄ or ► to select the Settings/Adj.
tab ( ).
Note
• If the T ab Selection screen is not displayed, press the Menu button.
2. Press the OK button.
The Set./Adj. Menu is displayed.
3. Press ▲ or ▼ to select Adj. Fine Feed , and then press the OK button.
4. Press ▲ or ▼ to select a setting value in the range -5 to +5, and then press the OK button.
The setting is now applied.
618 Adjustments for Better Print Quality
To Next Page
Loading...
