Canon Laser Class 810 - Page 103

4-7
Sending Documents
Density
1 Press [Fax/Send] repeatedly to select the sending method, then press [OK].
If using the LASER CLASS 810, you can switch to the Fax mode by pressing [Copy/Fax].
2 Press [Density] repeatedly to select the density.
<Darker>: to make light documents darker.
<Standard>: Suitable for copying regular originals.
<Lighter>: to make dark documents lighter.
These settings return to the default values after all documents are scanned. If you want to keep the
settings, set the density as following;
[Additional Functions]
 <TX/RX SETTINGS>  <TX/RX COMMON SET.>  <TX SETTINGS> 
<SCANNING DENSITY> (See “Setting Menu,” on p. 12-5.)