4-25
Sending Documents
Editing One-Touch Keys/Coded Dial Codes
1 Press [Additional Functions].
2 Press [ ] or [ ] to select <ADDRESS BOOK SET.>, then press [OK].
3 Press [ ] or [ ] to select <1-TOUCH SPD DIAL> or <CODED SPD DIAL>, then
press [OK].
4 Press [ ] or [ ] to select the one-touch key (01 to 80) or coded dial code
(LASER CLASS 810: 000 to 119, LASER CLASS 830i: 000 to 419) you want to edit,
then press [OK].
You can also select a one-touch key or coded dial code by pressing the corresponding one-touch key, or
[Coded Dial] followed three-digit code.
●
To Next Page
