5-21
Receiving Documents
Printing or Erasing Documents with Forwarding Errors
1 Press [System Monitor] repeatedly to select <FORWARD ERR. STATUS>, then
press [OK].
2 Press [ ] or [ ] to select the desired document, then press [OK].
3 Press [ ] or [ ] to select <PRINT> or <CANCEL>, then press [OK].
If <MEMORY LOCK> is <ON> in <COMMUNICATIONS> in <SYSTEM SETTINGS>, the documents cannot
be printed.
4 Press [ ] to select <YES>.
If you do not want to print or erase the job, press [ ] to select <NO>.
5 Press [Stop] to return to the standby mode.
To Next Page
Loading...
