System Manager Settings
9-6
Registering the Department ID, Password, and Page Limit
1 Press [Additional Functions].
2 Press [ ] or [ ] to select <SYSTEM SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter the System Manager ID and System
Password using the numeric keys, then press [Log In/Out (ID)].
3 Press [ ] or [ ] to select <MANAGE DEPT. ID>, then press [OK].
4 Press [ ] or [ ] to select <ON>, then press [OK].
5 Press [ ] or [ ] to select <REGISTER DEPT. ID>, then press [OK].
6 Press [ ] or [ ] to select the number to which department will be
designated, then press [OK].
7 Use the numeric keys to enter the Department ID, then press [OK].
If you do not want to set a password, you can use the machine by entering only the Department ID.
8 Press [ ] or [ ] to select <PASSWORD>, then press [OK].
To Next Page
Loading...
